Elle TENS Plus

Elle TENS Plus

NeuroTrac® Labour TENS - EX HIRE

Ex-hire obstetric TENS (earlier model) in good working order with 6 months warranty, NEW electrode pads & battery.

Great option for those wanting to buy a Labour TENS to use afterwards or again for subsequent pregnancies.

The Labour TENS machine is small and light weight and comes with a separate hand held boost button enabling you to easily & quickly select boost mode. When attached you can move around freely during labour. The Labour TENS is an advanced digital, dual channel, obstetric TENS unit featuring a dedicated labour pain programme (no set-up required) and comes with four large 50 x 90mm electrodes for maximum comfort when placed on the patients back.

The unit can be easily switched between two modes with the use of the separate hand held boost button. One mode is designed for the period between contractions and the other during contractions.

Importantly Labour TENS is a very easy to use machine with a large LCD screen and a high capacity output.

$99.00
SKU
LabourTENS-ExHire

Ex-hire obstetric TENS (earlier model) in good working order with 6 months warranty, NEW electrode pads & battery.

The Obstetric (Labour) TENS machine is a small, light weight, advanced digital, dual channel, obstetric TENS unit featuring a dedicated labour pain programme (no set-up required). The unit can be switched between two modes with the use of a separate hand held boost button. One mode is designed for the period between contractions and the other during contractions.

Features:-

  • Suitable for Obstetrics and during Labour
  • Digital Dual Channel
  • Dedicated Labour Pain programme for ease of use
  • Uses 4 large electrodes (pads) for best operation and comfort
  • Remote wired boost button for additional control at times of increased pain
  • Keypad with large buttons for ease of use
  • Compact, light and reliable
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Physical dimensions: 108 x 62 x 23 mm

Weight: 70gm without battery, 100gm with battery.

  • Dual channel (with seperate intensity controls)
  • Current Amplitude: 0 to 90 milli amps (mA) into 500 ohm load - indication only. Actual current will tend to be less than indicated due to electrode impedance. At 1000 ohms load (Electrodes in poor condition) the maximum current will be limited to 70 mA
  • Output type: Constant current, maximum output voltage 180 volts +10 / -30 volts
  • Waveform: Asymmetrical, rectangular bi-phasic with zero DC current
  • Fixed pulse width: 220 micro seconds (uS)
  • Fixed pulse rate: 90 hertz (Hz) in continuous mode
  • Mode: Continuous (Boost mode)
  • Burst mode: Bursts of 9 pulses (200 uS) at 150 Hz, repeating twice every second (Rest mode)
  • Ramp up time: 0.8 seconds from Rest to Boost
  • Time duration of the treatment is continuous until switched off
  • If the 9v battery voltage is below 6.6 volts the unit will not turn on
  • Open Electrode Detection: If an open circuit is detected at the output of channel A or B (ie if electrodes have not been placed on your body) the output current will be reset to zero mA

The Verity Medical Obstetric TENS comes in a soft carry case (approx 26 x 18 x 5 cm) containing:

1 x Verity Medical Obstetric TENS machine (earlier model)
4 x self adhesive electrodes, 50 x 90mm (re-usable for single patient)
1 x set of electrode wires for connecting electrodes to TENS
1 x hand held boost button
1 x 9v alkaline battery
Manufacturers user manual

Also recommended for purchase is an arm band for securing the TENS unit  to your upper arm

We found other products you might like!